| General information |
| Product type designation |
IM 155-5 PN BA |
| HW functional status |
FS01 |
| Firmware version |
V4.0.0 |
| Vendor identification (VendorID) |
0x002A |
| Device identifier (DeviceID) |
0X0312 |
| Product function |
| ● I&M data |
Yes; I&M0 to I&M3 |
| Engineering with |
| ● STEP 7 TIA Portal configurable/integrated as of version |
V14 with HSP 0187 |
| ● STEP 7 configurable/integrated as of version |
V5.5 SP3 / - |
| ● PROFINET as of GSD version/GSD revision |
V2.3 / - |
| Configuration control |
| via user data |
No |
| via dataset |
No |
| Supply voltage |
| Rated value (DC) |
24 V |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| Reverse polarity protection |
Yes |
| Short-circuit protection |
Yes |
| Mains buffering |
| ● Mains/voltage failure stored energy time |
5 ms |
| Input current |
| Current consumption (rated value) |
1 A |
| Current consumption, max. |
1.7 A |
| Inrush current, max. |
2.8 A |
| I²t |
0.04 A²·s |
| Power |
| Infeed power to the backplane bus |
14 W |
| Power loss |
| Power loss, typ. |
3 W |
| Address area |
| Address space per module |
| ● Address space per module, max. |
64 byte; per input / output |
| Address space per station |
| ● Address space per station, max. |
64 byte; per input / output |
| Hardware configuration |
| Integrated power supply |
Yes |
| System power supply can be plugged in to left of IM |
No |
| Number of permissible power segments |
1 |
| Rack |
| ● Modules per rack, max. |
12; I/O modules |
| Submodules |
| ● Number of submodules per station, max. |
108; 9 submodules / I/O modules |
| Interfaces |
| Number of PROFINET interfaces |
1; 2 ports (switch) RJ45 |
| 1. Interface |
| Interface types |
| ● Number of ports |
2 |
| ● integrated switch |
Yes |
| ● RJ 45 (Ethernet) |
Yes |
| ● BusAdapter (PROFINET) |
No |
| Protocols |
| ● PROFINET IO Device |
Yes |
| ● Media redundancy |
Yes |
| Interface types |
| RJ 45 (Ethernet) |
| ● Transmission procedure |
PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
| ● 100 Mbps |
Yes |
| ● Autonegotiation |
Yes |
| ● Autocrossing |
Yes |
| Protocols |
| PROFINET IO Device |
| Services |
| — Isochronous mode |
No |
| — Open IE communication |
Yes |
| — IRT |
No |
| — PROFIenergy |
No |
| — Prioritized startup |
No |
| — Shared device |
Yes |
| — Number of IO Controllers with shared device, max. |
2 |
| Redundancy mode |
| ● MRP |
Yes |
| ● MRPD |
No |
| ● PROFINET system redundancy (S2) |
No |
| Open IE communication |
| ● TCP/IP |
Yes |
| ● SNMP |
Yes |
| ● LLDP |
Yes |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) |
No |
| Equidistance |
No |
| Interrupts/diagnostics/status information |
| Status indicator |
Yes |
| Alarms |
Yes |
| Diagnostics function |
Yes |
| Diagnostics indication LED |
| ● RUN LED |
Yes; Green LED |
| ● ERROR LED |
Yes; Red LED |
| ● MAINT LED |
Yes; yellow LED |
| ● Connection display LINK TX/RX |
Yes; 2x green-yellow LEDs |
| Potential separation |
| between backplane bus and electronics |
No |
| between PROFINET and all other circuits |
Yes |
| between supply and all other circuits |
No |
| Permissible potential difference |
| between different circuits |
Safety extra low voltage SELV |
| Isolation |
| Isolation tested with |
707 V DC (type test) |
| Standards, approvals, certificates |
| Network loading class |
2 |
| Ambient conditions |
| Ambient temperature during operation |
| ● horizontal installation, min. |
0 °C |
| ● horizontal installation, max. |
60 °C |
| ● vertical installation, min. |
0 °C |
| ● vertical installation, max. |
40 °C |
| Dimensions |
| Width |
35 mm |
| Height |
147 mm |
| Depth |
129 mm |
| Weights |
| Weight, approx. |
236 g |
| last modified: |
11/10/2018 |
