Monitoring Safety Relay Allen-Bradley MSR117T, input 1NC, output 3NO safety, 1NC aux., 24VAC/VDC, TS35, Allen-Bradley

Monitoring Safety Relay, Type: MSR117T Series, Coil: 24 VAC/VDC, Contact Configuration: Input: 1NC, Output: 3NO Safety, 1NC Auxiliary, Mounting: 35 MM DIN Rail, Resistance: 25 OHM, Enclosure: IP20, IP40, NEMA 1, Withstand Voltage: 2500 V, Size: 2.95 IN Height X 0.88 IN Width X 4.33 IN Depth, Operating Cycles: Mechanical: 2000000, Temperature Rating: -5 To 55 DEG C, Environmental Conditions: Vibration: 0.35 MM At 10 To 55 HZ, Shock: 10 G At 16 MS, 100 Shocks, Reset Type: Automatic/Manual Or Monitored Manual

• Item Name: Monitoring Safety Relay

• Type: MSR117T Series

• Coil: 24 VAC/VDC

• Contact Configuration: Input: 1NC, Output: 3NO Safety, 1NC Auxiliary

• Mounting: 35 MM DIN Rail

• Resistance: 25 OHM

• Enclosure: IP20, IP40, NEMA 1

• Withstand Voltage: 2500 V

• Size: 2.95 IN Height X 0.88 IN Width X 4.33 IN Depth

• Operating Cycles: Mechanical: 2000000

• Temperature Rating: -5 To 55 DEG C

• Environmental Conditions: Vibration: 0.35 MM At 10 To 55 HZ, Shock: 10 G At 16 MS, 100 Shocks

• Reset Type: Automatic/Manual Or Monitored Manual

The MSR117T has one normally closed single-channel input for use with gate interlocks and emergency stop buttons in lower risk applications. The MSR117T has output monitoring that can accommodate an automatic/manual reset function. Automatic/manual reset can use a jumper or can be used to check operation of the contacts. The MSR117T has three normally open safety outputs and one normally closed auxiliary output. The safety outputs have independent and redundant internal contacts to help ensure the safety function. The auxiliary contact is a nonsafety output intended to provide an external signal about the status of the safety outputs. The MSR117T can be activated via the terminals A1-A2 and the feedback/reset loop X1-X2. Then the safety outputs 13-14, 23-24 and 33-34 close and enable operation.

• Category 4 per EN 954-1
• Stop category 0
• Single channel input
• 22.5 mm wide housing
• Standards: CE marked, cULus listed, TUV certified
• Applications: For use in SIL3 systems