|
|
|
|
|
Releeliides RSS, SNC, 1CO 6A 250V, cv 24VDC, LED, free-wheel diode, reverse polarity protection, push-in, 0.14..2.5mm², 6.4mm, TS35 Kood:
RSS113024F-SNC05-S-A
Hind
Tootja
:
|
Saadavus:
Laos
|
Kaal:
0.028 kg/tk
|
Maht:
0.0001 m3/tk
|
Hulgipakendi kogus:
10tk
|
|
|
|
Overview
Relay module, 1CO contact (AgNi), rated control voltage 24VDC ±20%, continuous current 6A, screw connection, test button available: No.
Temperatures
| Storage temperature | -40..85°C |
| Ambient temperature | -40..60°C |
| Humidity | 5..95% relative humidity, Tu=40°C, without condensation |
Environmental compliance
| RoHS compliance status | Compliant with exemption |
| RoHS exemption | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
Rated data UL
| Ambient temperature (operational), max. | 60°C |
| Connection cross-section AWG, min. | AWG26 |
| Connection cross-section AWG, max. | AWG14 |
| Type of conductor | Rigid copper conductor, flexible copper conductor |
| Tightening torque, max. | 0.4Nm |
| Pollution severity level | 2 |
Control side
| Rated control voltage | 24VDC ±20% |
| Rated current DC | 11.5mA |
| Power rating | 280mW |
| Status indicator | Green LED |
| Protective circuit | Free-wheeling diode, reverse polarity protection |
| Coil voltage (replacement relay) | 24VDC |
Load side
| Rated switching voltage | 250VAC |
| Continuous current | 6A |
| Max switching frequency at rated load | 0.1Hz |
| Max switching voltage, AC | 250V |
| Max switching voltage, DC | 250V |
| Min switching power | 1mA@24V, 10mA@12V, 100mA@5V |
| Inrush current | 20A/20ms |
| AC switching capacity (resistive), max. | 1500VA |
| DC switching capacity (resistive), max. | 144W@24V |
| Switch-on delay | ≤6ms |
| Switch-off delay | ≤16ms |
| Contact type | 1CO contact (AgNi) |
| Mechanical service life | 5x10^6 switching cycles |
General data
| Operating altitude | ≤2000m above sea level |
| Mounting rail | TS35 |
| Colour | Black |
| UL94 flammability rating (housing) | V-0 |
| UL94 flammability rating (retaining clip) | V-0 |
Insulation coordination
| Rated voltage | 300V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage (control-load) | ≥6mm |
| Dielectric strength (control-load) | 4kVeff/1min |
| Type of isolation at input and output | Reinforced insulation |
| Dielectric strength of open contact | 1kVeff/1min |
| Dielectric strength to mounting rail | 4kVeff/1min |
| Impulse withstand voltage | 6kV (1.2/50µs) |
| Protection degree | IP20 |
Approvals
Connection data
| Wire connection method | Screw connection |
| Stripping length (rated connection) | 8mm |
| Tightening torque, max. | 0.4Nm |
| Clamping range (rated connection) | 1.5mm² |
| Clamping range, min. | 0.14mm² |
| Clamping range, max. | 2.5mm² |
| Wire connection cross-section AWG, min. | AWG26 |
| Wire connection cross-section AWG, max. | AWG14 |
| Wire cross-section, solid, min. | 0.14mm² |
| Wire cross-section, solid, max. | 2.5mm² |
| Wire connection cross-section, finely stranded, min. | 0.14mm² |
| Wire connection cross-section, finely stranded, max. | 2.5mm² |
| Wire-end ferrules DIN46228/4, min. | 0.25mm² |
| Wire-end ferrules DIN46228/4, max. | 2.5mm² |
| Flexible AEH (DIN46228-1), min. | 0.25mm² |
| Flexible AEH (DIN46228-1), max. | 1.5mm² |
| Two clampable wires, finely stranded, min. | 0.5mm² |
| Two clampable wires, finely stranded, max. | 1mm² |
| Blade size | PH0 |
|
|
|
