e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük

Klienditeenindus E-R 9-17
Helista: +372 622 9119

	Tooteid:	Maksumus:
	0	€ 0,00

Logi sisse

Näita kõiki kategooriaid

Ei leidnud sobilikku toodet?

Head pakkumised!

Digital Combination Module Module MicroLogix, 14-ch., input 8x 24VDC sink/source, output 6x relay contact 5..265VAC, TS35, panel mount, Allen-Bradley

Tootepuu > Paigaldustarvikud > Juhtmed, kaablid, plasttorud, plastkõrid > Juhtmed H0

Pilt on illustreeriv

Juhe H05V-K, 0.75mm² 300/500V -40..70°C, 100m/pck, roheline

Kood: H05V-K-0.75-GRN

Kliki siia ja küsi erihinda!

€ 18,00 /pc
Package 100m, unit price 0.18EUR/m

Saadavus:

Laos

Kaal:

0.012 kg/m

Wire H05V-K 0.75mm² 300/500V -40..70°C 100m/pck, green

Application range

For wiring of lamps, devices, switchgear cabinets and distribution boxes
For installation in tubes, on, in and under plaster as well as in closed installation ducts
In building with a high density of people or valuable assets
For use in dry rooms

Design

Fine-wire strand made of bare copper wires
Core insulation: Halogen-free

Product features

The insulation material is halogen-free and free of other materials which could release toxic gases in the event of fire
Low amount of corrosive gases in the event of fire
Low smokes/low smoke density in the event of fire according to IEC 61034
Flame-retardant according to IEC 60332-1-2

Technical data:	PVC single cores to DIN VDE 0285-525-2-31 / DIN EN 50525-2-31 and IEC 60227-3
Temperature range:	flexing -5°C to +70°C fixed installation -30°C to +80°C
Nominal voltage:	U0/U 300/500 V
Test voltage:	2000 V
Insulation resistance:	min. 10 MOhm x km
Minimum bending radius:	fixed insatallation 4x core Ø
Radiation resistance:	up to 80x10⁶ cJ/kg (up to 80 Mrad)
Cable structure:	Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5 Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3 Core identification see table below
Properties:	The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
Tests:	PVC self-extinguishing and flame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Note:	The following colours are recommended: black, white, blue, grey, brown, red, orange, turquoise, violet and pink. Exceptions are the colours green and yellow; these are only permitted if the safety regulations allows. Green is permitted for the identification of luminous decorative chains. All 2-coloured combinations of the above single colours are allowed
Application:	These single cores are determined for the installation to the inside of apparatus as well as for the protective laying to the lightings, in dry rooms, in production facilities, switch and distributor boards, in tubes, under and surface mounting of plasters.