e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük
Klienditeenindus E-R 9-17
Helista: +372 622 9119
Est En
Elit shopping basket
Tooteid: Maksumus:
0
€ 0,00
    search
Logi sisse
Kasutajatunnus/e-post:

Parool:

Näita kõiki kategooriaid
Ei leidnud sobilikku toodet?
Head pakkumised!



Sitop PSU8200, Stabilized Power Supply, input 3x400..500VAC, output 40A 24VDC, Siemens
Pilt on illustreeriv
Sitop PSU8200, Stabilized Power Supply, input 3x400..500VAC, output 40A 24VDC, Siemens
Kood: 6EP1437-3BA10
Hind (indikatiivne)
€ 820,90  /tk
Tootja :
Saadavus:
21 päeva
Kaal:
3.57 kg/tk
Maht:
0.0051 m3/tk
Kogus (tk):
Plus sign Minus sign
 

 

Sitop PSU8200 24V 40A Stabilized Power Supply, input 3x400..500VAC, output 40A 24VDC, Siemens

SITOP PSU8200 24 V/40 A
SITOP PSU8200 24 V/40 A Stabilized power supply Input: 400-500 V 3 AC Output: 24 V DC/40 A !!! Phased-out product !!! Successor: 6EP3437-8SB00-0AY0
Input
Input 3-phase AC
Rated voltage value Vin rated 400 ... 500 V
Voltage range AC 320 ... 575 V
Wide-range input Yes
Mains buffering at Iout rated, min. 15 ms; at Vin = 400 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 47 ... 63 Hz
Input current
● at rated input voltage 400 V 2.6 A
● at rated input voltage 500 V 2.1 A
Switch-on current limiting (+25 °C), max. 56 A
I²t, max. 2.24 A²·s
Built-in incoming fuse none
Protection in the mains power input (IEC 898) Required: 3-pole connected miniature circuit breaker 10 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.2 %
Residual ripple peak-peak, max. 100 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 200 mV
Adjustment range 24 ... 28.8 V
Product function Output voltage adjustable Yes
Output voltage setting via potentiometer; max. 960 W
Status display Green LED for 24 V OK
Signaling Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 2.5 s
Voltage increase time of the output voltage maximum 500 ms
Rated current value Iout rated 40 A
Current range 0 ... 40 A
● Note +60 ... +70 °C: Derating 3.75%/K
Supplied active power typical 960 W
Short-term overload current
● at short-circuit during operation typical 120 A
Duration of overloading capability for excess current
● at short-circuit during operation 25 ms
Constant overload current
● on short-circuiting during the start-up typical 44 A
Parallel switching for enhanced performance Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 92 %
Power loss at Vout rated, Iout rated, approx. 83 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3 %
Setting time maximum 10 ms
Protection and monitoring
Output overvoltage protection < 35 V
Current limitation, typ. 44 A
Property of the output Short-circuit proof Yes
Short-circuit protection Alternatively, constant current characteristic approx. 44 A or latching shutdown
Enduring short circuit current RMS value
● typical 44 A
Overcurrent overload capability in normal operation overload capability 150 % Iout rated up to 5 s/min
Overload/short-circuit indicator LED yellow for "overload", LED red for "latching shutdown"
Safety
Primary/secondary isolation Yes
Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class Class I
Leakage current
● maximum 3.5 mA
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
FM approval -
CB approval Yes
Marine approval ABS, DNV GL
Degree of protection (EN 60529) IP20
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
Operating data
Ambient temperature
● during operation -25 ... +70 °C
— Note With natural convection; startup tested starting from -40 °C nominal voltage
● during transport -40 ... +85 °C
● during storage -40 ... +85 °C
Humidity class according to EN 60721 Climate class 3K3, no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L1, L2, L3, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely stranded
● Output +, -: 2 screw terminals each for 0.33 ... 10 mm²
● Auxiliary 13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm²
Width of the enclosure 150 mm
Height of the enclosure 125 mm
Depth of the enclosure 150 mm
Required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
● right 0 mm
Weight, approx. 3.4 kg
Product feature of the enclosure housing for side-by-side mounting Yes
Installation Snaps onto DIN rail EN 60715 35x15
Electrical accessories Buffer module
Mechanical accessories Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20
MTBF at 40 °C 885 739 h
Other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
 
 
Elit OÜ | e-post: elit@elit.ee | +372 622 9119 | 2021 ©


 
X
 
X