e-Elit - juhtiv
elektri- ja automaatikatarvikute
online hulgimüük 		Klienditeenindus E-R 9-17
Helista: +372 622 9119 		Est En
Elit shopping basket
Tooteid: Maksumus:
0
€ 0,00
    search
Logi sisse
Kasutajatunnus/e-post:

Parool:

Näita kõiki kategooriaid
Ei leidnud sobilikku toodet?
Head pakkumised!
Jätkukarp LSA 600MHz Cat6 UTP
Jätkukarp LSA 600MHz Cat6 UTP



Inductive Sensor NBN40-U1-E2, 40x40x118, Pepperl+Fuchs
Pilt on illustreeriv
Inductive Sensor NBN40-U1-E2, 40x40x118, Pepperl+Fuchs
Kood: 194779
Hind (indikatiivne)
€ 69,40  /tk
Tootja :
Saadavus:
21 päeva
Kaal:
0.225 kg/tk
Maht:
0.0002 m3/tk
Kogus (tk):
Plus sign Minus sign
 
 

Inductive Sensor NBN40-U1-E2, 40x40x118, Pepperl+Fuchs

Inductive sensor NBN40-U1-E2
  • Sensor head bidirectional and rotatable
  • 40 mm non-flush
  • 3-wire DC
  • 4 LEDs indicator for 360° visibility

Datasheet excerpt: Technical data of NBN40-U1-E2

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance40 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 32.4 mm
Actual operating distance36 ... 44 mm
Reduction factor rAl 0.31
Reduction factor rCu 0.3
Reduction factor r304 0.74
Reduction factor rBrass 0.39
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency0 ... 180 Hz
Hysteresistyp. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2 V
Operating current0 ... 200 mA
Off-state current0 ... 0.5 mA typ. 0.01 mA
No-load supply current≤ 20 mA
Operating voltage indicatorLED, green
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1510 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
EAC conformityTR CU 020/2011
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection typescrew terminals
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPA/metal with epoxy powder coating
Sensing facePA
Degree of protectionIP68 / IP69K
Mass225 g
NoteTightening torque: 1.8 Nm (housing)
 
 
Trüki nupp
Elit OÜ | e-post: elit@elit.ee | +372 622 9119 | 2021 ©

GlobalStore™ - © AZS SServices 2005-2021

 
X
 
X